Manage the Broadcast Interface

About this task

Manage the broadcast interface by specifying and displaying which router interfaces can receive UDP broadcasts to forward.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select UDP Forwarding.
  3. Select the Broadcast Interfaces tab.
  4. Select Insert.
  5. In LocalIfAddr, select the ellipsis (...) to select a local interface IP address from the list.
  6. Select OK.
  7. In UdpPortFwdListId, select the ellipsis (...) to select a forwarding list ID from the list.
  8. Select OK.
  9. In MaxTtl, type the maximum number of hops an IP broadcast can take from the source device to the destination device (the default is 4; the range is 1 to 16).
  10. In BroadCastMask, enter the subnet mask of the local interface that broadcasts the UDP broadcast packets.

    When you configure the UDP forwarding broadcast mask, the broadcast mask must be less specific (shorter in length) or equally specific (equal in length) to the subnet mask of the IP interface on which it is configured. If the UDP forwarding broadcast mask is more specific than the subnet mask of the corresponding IP interface, UDP forwarding does not function properly.

  11. Select Insert.

Broadcast Interfaces Field Descriptions

Use the data in the following table to use the Broadcast Interfaces tab.

Name

Description

LocalIfAddr

Specifies the IP address of the local router interface that receives forwarded UDP broadcast packets.

UdpPortFwdListId

Specifies the number of the UDP lists or profiles that this interface is configured to forward (0 to100). A value of 0 indicates that the interface cannot forward any UDP broadcast packets.

MaxTtl

Specifies the maximum number of hops an IP broadcast packet can take from the source device to the destination device (the default is 4; the range is 1 to 16).

NumRxPkts

Specifies the total number of UDP broadcast packets received by this local interface.

NumFwdPkts

Specifies the total number of UDP broadcast packets forwarded by this local interface.

NumDropPktsMaxTtlExpired

Specifies the total number of UDP broadcast packets dropped because the time-to-live (TTL) value expired.

NumDropPktsDestUnreach

Specifies the total number of UDP broadcast packets dropped because the destination was unreachable.

NumDropPktsUnknownPort

Specifies the total number of UDP broadcast packets dropped because the destination port or protocol specified has no matching forwarding policy.

BroadCastMask

Specifies the subnet mask of the local interface that broadcasts the UDP broadcast packets.